Home > Products > Network Protocols > MGC-BRICKS H.248 > MGC-BRICKS H.248

Full Services Protocol Offerings

Enea offers a full spectrum of porting, consultation, training, certification, compliance, and customization services to meet the unique needs of OEMs, TEMs, and operators.  Leverage more than 40 years of telecom protocol development, training, standards compliance and customization experience. Contact Enea for more information about Netbricks services.

MGC-BRICKS H.248

Enea Netbricks Line of Protocols for NGN and IMS Media Gateway Applications

Enea offers a wide range of highly portable telecom protocol stacks for TDM, 3G, IMS, and NGN networks, as well as fax and data transfer protocols and signal processing and analysis software. All Enea Netbricks protocols stacks are compliant with ITU, ETSI, ANSI, IETF, 3GPP, and many other standards bodies’ specifications. 

All of Enea’s Netbricks line of protocols are written in ANSI C and take advantage of a modular, portable architecture that allows hardware platform and compiler independence.  Enea Netbricks protocols are provided in source code to over 400 network equipment providers (NEPs), and device OEMs worldwide, assisting them in getting products to market quickly, with very low risk and significantly reduced development costs.

  • Portable protocol stacks compliant with protocol standards as published by the key standards bodies around the world ( ITU, ETSI, ANSI, IETF, 3GPP).
  • Supplied as source code.
  • Used by over 400 global, industry leading telecommunications equipment manufacturers and OEMs.
  • Backed by over 20 years of protocol development expertise and 40 years of telecom software expertise.

Enea Netbricks MEGACO/H.248 protocol stack, MGC-BRICKS H.248, is a source code implementation of the MEGACO/H.248 Protocol. MEGACO is a protocol enabling a centralized softswitch (or Media Gateway Controller, MGC) to control media gateways between voice over packet (VOP) networks and traditional networks. MEGACO protocol is a joint work of IETF and ITU-T and named ‘MEGACO’ in IETF documents and H.248 in ITU-T documents, but the protocols are identical.

Enea’s H.248 stack is compliant with IETF RFC 3525 and ITU-T H.248.1 for version 2 and 3.

Featured Case Study

Alcatel-Lucent provides solutions that enable service providers, enterprises and governments worldwide, to deliver voice, data and video communication services to end-users.  As a leader in fixed, mobile and converged broadband access, carrier and enterprise IP technologies, applications, and services, Alcatel-Lucent offers the end-to-end solutions that enable compelling communications services for people at home, at work and on the move.

Nortel Networks’ next-generation technologies, for both service provider and enterprise networks, support multimedia and business-critical applications. Nortel's technologies are designed to help eliminate today's barriers to efficiency, speed and performance by simplifying networks and connecting people to the information they need, when they need it. Nortel does business in more than 150 countries around the world.

Featured Alliances

RMI Corporation is a fabless semiconductor company providing High-Performance Super System-on-a-Chip (SuperSoC™) Processor solutions for the Infrastructure, Enterprise, and Consumer Media markets. Applications include Wireless, Networking Security, Thin Clients, and Connected Multi-Media.

MontaVista Software invented embedded Linux commercialization in 1999 to give device designers a platform to deliver the best possible product in the shortest possible time. Since then, due to growth and innovation MontaVista has remained the leading company in this category.
  • Gateway and Control Manager Application
  • Support of ITU-T T.38 Fax Relay in Megaco
  • Support of both text and BER ASN1 (option) modes
  • Support of all transactions
  • Support of event/signal packages : Generic, Base Root, Tone Generator, Tone Detection, Basic DTMF Generator, DTMF detection, Call Progress Tones Generator, Call Progress Tones Detection, Analogue Line Supervision, Basic Continuity, Network, RTP, TDM Circuit and numerous other packages
  • H.248 / MEGACO Finite State machine with security procedures over UDP
  • Support of multiple instances and both sides (MGC and MG) on a single system

Products developed with MGC-BRICKS H.248 for VoP applications include the following NGN equipment:

  • Softswitches
  • Media Gateways
  • SOHO Access gateways
  • IMS MRFC, MFRP

Enea Netbricks MGC-BRICKS H.248 is a source code implementation of the H.248 protocol compliant with the following standards: 

  • RFC 3525 and ITU-T H.248.1 (version 2 and 3)
  • RFC 4566 (SDP)

The packages defined in the following recommendations are supported (BER & Text format):

  • ITU-T H.248.1 Generic, Base Root, Tone Generator, Tone Detection, Basic DTMF, Generator, DTMF Detection, Call Progress Tones Generator, Call, Progress Tones Detection, Analog Line Supervision, Basic Continuity, Network, RTP, TDM Circuit
  • ITU-T H.248.2 Facsimile, text, conversation and call discrimination
  • ITU-T H.248.3 User Interface Elements and Actions
  • ITU-T H.248.6 Dynamic Tone Definition
  • ITU-T H.248.7 Generic Announcements
  • ITU-T H.248.9 Advanced Media Server
  • ITU-T H.248.10 Congestion Handling Package
  • ITU-T H.248.11 Overload Control
  • ITU-T H.248.12 H.323 and H.324 interworking
  • ITU-T H.248.12
  • Amendment 1 Extended H.324, H.245 command and H.245 indication
  • ITU-T H.248.13 Quality Alert Ceasing
  • ITU-T H.248.14 Inactivity Timer
  • ITU-T H.248.16 Enhanced Digit Collection
  • ITU-T H.248.19 Floor control, view, volume control, volume detection, volume level mixing, mixing volume level control
  • ITU-T H.248.23 Enhanced Alerting
  • ITU-T H.248.26 Enhanced Analog Lines
  • ITU-T H.248.27 Conferencing tones generation
  • ITU-T H.248.30 RTCP extended performance metrics packages
  • ITU-T H.248.34 Stimulus analogue line
  • ITU-T H.248.37 IP NAPT traversal
  • ITU-T H.248.45 MGC information
  • ITU-T Q.1950 Expanded Call Progress Tones Generator, Basic Services Tones Generation
  • ITU-T Q.1950 Intrusion Tones Generation
  • ITU-T Q.1950 Business Tones Generation
  • TS 101 332 EMP package
  • TS 102 333 Diffserv
  • TS 102 333 Gate Management
  • TS 102 333 Traffic Management
  • TS 102 333 MPLS
  • TS 102 333 VLAN
  • TS 102 333 Gate Recovery Information
  • TS 102 333 NAT traversal
RTP-BRICKS RTP/RTCP stack for next generation networks.  RTP-BRICKS is a scalable and portable stack implementing the  Real-time Transport Protocol (RTP) suite and its QoS companion protocol 'Real-time Control Protocol' (RTCP - Future release) as defined by the IETF Transport Working Group. View the RTP-BRICKS Web page for more information.